Fault Codes Help for biorb Air 30

Manufacturer

Model

biorb Air 30

The Biorb Air 30 is an aquarium system featuring an integrated LED lighting system and air pump. It simulates a natural day/night cycle and includes features like automatic water temperature control and fogging to mimic environmental conditions. The unit performs a system check upon startup, indicated by flashing lights, and can operate in a demo mode. It offers adjustable settings for temperature and lighting, controllable via a remote. The system includes safety features like automatic shut-off and indicators for low water levels.

View Manual

AI Assistant: How can I help you with the biorb Air 30? My knowledge is based on the product manual.

Continuous Flashing Red LED

Potential failure during startup tests.

Solutions:

Switch off unit, re-check all connections, and re-apply power.

Fine Mist Simulation Not Working

No fogging occurring.

Solutions:

Ensure humidity is below the threshold for fogging to activate.

Flashing Amber Light (5 times on startup)

Unit performs system check.

Solutions:

No action required. Wait for the system check to complete.

Flashing Light - Low Water Level

Light flashes indicating water needs replenishing.

Solutions:

Refill the water to the appropriate level.

LED Day/Night Light Not Functioning

LED light is not illuminating.

Solutions:

Contact customer support for assistance.

Standby Mode

Selecting standby mode.

Solutions:

Press and hold 1 second select standby mode.

Timer Reset

Need to reset the timer.

Solutions:

Press and hold the button for 5 seconds to reset the timer (default temperate profile, 12 hour light cycle).

Unit Automatically Defaults to Moderate Temperature

No setting selected within 5 minutes.

Solutions:

Select a desired setting within 5 minutes of startup.

Unit Doesn't Power On

No response when plugged in.

Solutions:

Ensure power cord is fully inserted. Check power outlet.

Unit Fades Off

Indicates water needs replenishing.

Solutions:

Refill water.

Unit Not Responding

Unit is unresponsive to remote control.

Solutions:

Replace remote control batteries.

Unit Requires Reset After Prolonged Disconnection

Unit has been unplugged for a week or more.

Solutions:

Press and hold the power button (or master reset button) for 5 seconds to perform a master reset.

Unit Stuck in Demo Mode

Unit remains in demo mode.

Solutions:

Press and hold the power button for 1 second to exit demo mode.

Wake Unit

Waking the unit from standby.

Solutions:

Press any button wake unit.