Fault Codes Help for Flair Flair 58 Plus 2

Flair Flair 58 Plus 2

The Flair 58 Plus 2 is a professional-grade, manual espresso machine. It features a preheat control system integrated into the base with three temperature settings (low, medium, high) for different roast levels. The machine utilizes a lever-operated system to build pressure and brew espresso. It includes a detachable preheat cable and power supply for portability, and comes with various components like a portafilter, tamper, puck screen, and drip tray. The machine is designed for use with a high-quality burr grinder to dial in espresso shots. It allows for back-to-back brewing using a valve plunger system.

View Manual

AI Assistant: How can I help you with the Flair Flair 58 Plus 2? My knowledge is based on the product manual.

Leaking Brew Cylinder

Water leaks from the brew cylinder during operation.

Solutions:

Ensure all connections are tight. Inspect the seals for damage. Avoid overfilling the brew cylinder.

Lever Alignment Issue

The lever does not align properly with the base or feels difficult to operate.

Solutions:

Re-check the assembly instructions and ensure the lever assembly is correctly bolted to the base. Tighten all screws. Contact Flair customer service if the lever assembly is damaged.

Low Pressure/Weak Espresso

Espresso shot is weak and lacks crema.

Solutions:

Adjust the burr grinder to a finer setting. Apply more consistent tamping pressure. Increase the preheat temperature.

No Espresso Flow

No espresso flows when the lever is lowered.

Solutions:

Adjust the burr grinder to a coarser setting. Reduce tamping pressure. Check the portafilter for blockages.

Plunger/Stem Disengagement

The plunger and stem become disengaged during operation.

Solutions:

Follow the cleaning instructions to re-orient the plunger correctly. Avoid applying excessive force during operation.

Preheat System Not Activating

Preheat controller lights do not illuminate when power is connected.

Solutions:

Ensure power supply is securely connected to both the controller and a working outlet. Test with a different outlet. Contact Flair customer service if the issue persists.

Preheat Temperature Incorrect

The preheat controller indicates an incorrect temperature or fails to reach the selected temperature.

Solutions:

Verify the correct temperature setting is selected. Ensure the machine is in a room with a reasonable ambient temperature. Contact Flair customer service if the heating element appears faulty.

Water Not Filling Brew Head

Water does not fill the brew head when using the valve plunger.

Solutions:

Wiggle the lever to minimize air pockets. Inspect the valve plunger for blockages or damage. Contact Flair customer service if the valve is faulty.