Filters
Siglent SDS1000X-E
The Siglent SDS1000X-E series is a digital oscilloscope featuring multiple channels, a high sample rate, and a deep memory depth. It offers various trigger modes, serial protocol decoding (I2C, SPI, UART, CAN, LIN), and mathematical functions. The device includes a user-friendly interface with adjustable vertical and horizontal scales, and supports waveform storage and recall. It is designed for general-purpose electronic testing and analysis.
View ManualE01
No Signal Detected
Solutions:
Check probe connection, Verify input coupling setting, Increase signal amplitude or adjust vertical scale
E02
Overload Error
Solutions:
Reduce input signal amplitude, Adjust vertical scale, Use an attenuating probe
E03
Trigger Failure
Solutions:
Verify trigger source, level, and slope settings, Ensure a valid trigger signal is present
E04
Memory Overflow
Solutions:
Reduce sample rate, Decrease acquisition time, Shorten memory depth
E05
System Error
Solutions:
Restart the oscilloscope, Contact Siglent support for repair
E06
Communication Error
Solutions:
Check USB cable connection, Restart the oscilloscope and computer, Reinstall communication drivers
E07
File Error
Solutions:
Check USB storage device, Format USB storage device, Try a different USB storage device
E08
Calibration Error
Solutions:
Contact Siglent support for calibration
E09
Fan Error
Solutions:
Restart the oscilloscope, Contact Siglent support for repair
E10
Self-Test Failed
Solutions:
Restart the oscilloscope, Contact Siglent support for repair
E11
Probe Error
Solutions:
Select the correct probe type in the oscilloscope settings
E12
Serial Decode Error
Solutions:
Verify serial communication settings (baud rate, data bits, parity, stop bits)
E13
Display Error
Solutions:
Restart the oscilloscope, Contact Siglent support for repair
E14
Temperature Error
Solutions:
Ensure adequate ventilation, Reduce ambient temperature